skip to main text

Cleaning the Print Head

Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary.

You need to prepare: a sheet of A4 or Letter-sized plain paper

  1. Make sure that the power is turned on.

  2. Load a sheet of A4 or Letter-sized plain paper.

    After closing the feed slot cover, the paper information registration screen is displayed on the LCD. Select A4 or Letter for Page size and Plain paper for Type, then select Register.

    If a message is displayed on the LCD, follow the directions in the message to complete registration.

  3. Open the operation panel, then pull out the paper output tray.

  4. Select Setup on the HOME screen.

    The setup menu screen will appear.

  5. Select Maintenance.

    The Maintenance screen will appear.

  6. Select Cleaning.

    The confirmation screen will appear.

  7. Select Yes.

    The printer starts cleaning the print head.

    Do not perform any other operations until the printer completes the cleaning of the print head. This takes about 1 minute.

    The pattern print confirmation screen will appear.

  8. Select Yes.

    The nozzle check pattern will be printed.

  9. Examine the nozzle check pattern.

Note